24V High speed E-roller

Die NDW Motorrollen für Hochgeschwindigkeitsanwendungen sind bürstenlose Gleichstrommotoren, die in eine konventionelle NDW Tragrolle mit ø50/60 mm integriert sind und in erster Linie dazu dienen, nicht-selbstangetriebene Rollen in Fördersystemen anzutreiben (max. Geschwindigkeit 3 m/s bei ø50 mm).

73493 PP NDW 1200rpm afbeeldingen

Technical Data

1. Actual current is depended on the conditions of the application, such as actual load, section length, slope etc. A very short current peak of <40ms will occur during startup of the E-roller.

2. Measured at 1 meter. Also dependent on the conditions of the application, such as conveyor frame, mounting type, load and resonance behavior of the system.

73493 PP NDW 1200rpm afbeelding rollen DU

E-roller transmissions

Within the ER50 series, E-rollers can be equipped with different transmission alternatives such as poly-v, grooves, toothed belts and round belts. The selection is based on the requirements of the application.

73493 PP NDW 1200rpm afbeeldingen3

Performance data - 1200 RPM

These values are given as guideline. Actual transfer capacity depends on application parameters such as nature of transported load, quality of the bearings, duty-cycle, type of transmission to non-driven rollers etc.

73493 PP NDW 1200rpm afbeeldingen4

E-roller controllers

Each motorized E-roller must be connected to a compatible NDW motor controller such as the BC50 or BP120 controller. All controllers are designed to precisely control the behaviour of the motorized roller.

Schließen