Type 29

Load roller with plastic bearing cartridges, fitted with a easy rol grooved ball bearing. Suitable for transporting medium- heavy products on a belt conveyor or a gravity conveyor in a dry, dusty environment.

Type 29
PPco
6202-6003 Easy rol
100 KG
ORANGE - GREY
Type 29-I

Load roller with curved plastic bearing cartridges, fitted with a easy rol grooved ball bearing. Suitable for transporting medium-heavy products on a belt conveyor or a gravity conveyor in a dry, dusty environment.

Type 29-I
PPco
6202-6003 Easy rol
100 KG
ORANGE - GREY
Type 30

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30-I

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30-I
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30NZ

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing equipped with a spring loaded plastic hexagonal 11 adapter both sides. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 30 NZ
PPco
6202-6003
50 KG
ORANGE - GREY
Type 31

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 31
Pa 6
6202
100 KG
ORANGE - GREY
Type 32

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 32
PC-Pa 6
6204
180 KG
ORANGE - BLACK
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 34

Load roller with steel bearing cartridges fixated by curling, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 34
Steel zinkplated
6202-6204
120 - 200 KG
ZINKPLATED
Type 37

Load roller with welded steel bearing cartridges, fitted with a plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor.

Type 37
Steel - PPco
6204
200 KG
STEEL - ORANGE
Type 38

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Type 38
Steel - PPco
6204-6206
200 KG
STEEL - BLACK
Type 39

Load roller with welded steel bearing cartridges, fitted with a steel labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a dusty environment. This roller is also available with heat‐resistant grease and heat‐resistant ball bearing.

Type 39
Steel
6204-6005
200 KG
STEEL
Type 40

Load roller with welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 40
Steel
6204-6305
300 KG
STEEL
Type 41

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Type 41
Steel
6204-6206
300 KG
STEEL
Type 42

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 42
Steel
6202 - ... - 6306
300 KG
STEEL
Type 44

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Type 44
3/8x7/32” Z=13
PA 6.6 HI
608 ... 6901
30 KG
BLACK
Type 45

Accumulating conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type 45
1/2x5/16” Z=11
0,05 - 0,07
PA 6.6 HI
6202
40 KG
BLACK - ORANGE
Type 46

Fixed drive conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Suitable for the transportation of lightweight products. This version is only for use in continuous transport.

Type 46
1/2x5/16” Z=11
PA 6.6 HI
6202
40 KG
BLACK - ORANGE
Type 47

Accumulating conveyor roller with a single steel sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 47
1/2x5/16” Z=11
0,05 - 0,07
C45
6202
100 KG
ZINK PLATED - ORANGE
Type 48

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 48
1/2x5/16” Z=11
C45
6202
100 KG
STEEL
Type 49

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 49
1/2x5/16” Z=13
0,05 - 0,07
STEEL
6202
100 KG
ZINK PLATED - ORANGE
Type 50

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 50
1/2x5/16” Z=13
C45
6202
100 KG
STEEL - ORANGE
Type 51

Accumulating conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type 51en52.jpg
1/2x5/16” Z=14
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 52

Fixed drive conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Type 52
1/2x5/16” Z=14
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 53

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 53
1/2x5/16” Z=14
0,05 - 0,07
STEEL
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 54

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 54
1/2x5/16” Z=14
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 56

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of heavy products.

Type 56
5/8x3/8” Z=15
STEEL
6204-6005
200 KG
STEEL - ORANGE
Type 58

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of very heavy products.

Type 58
3/4X7/16” Z=13
STEEL C45
6204-6005
250 KG
STEEL - ORANGE
Type 59

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type596063en64.jpg
1/2x5/16” Z=13
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 60

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Type596063en64.jpg
1/2x5/16” Z=13
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 61

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type-61
1/2x5/16” Z=13
0,05 - 0,07
STEEL C45
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 62

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 62en66.jpg
1/2x5/16” Z=13
STEEL C45
6202-6003
150 KG
ZINK PLATED - ORANGE
Type 63

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type596063en64.jpg
1/2x5/16” Z=14
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 64

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of medium‐heavy products. This version is exclusively for use in continuous transport.

Type596063en64
1/2x5/16” Z=14
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 65

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium-heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type-65
1/2x5/16” Z=14
0,05 - 0,07
STEEL C45
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 66

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy products.

Type 62en66.jpg
1/2x5/16” Z=14
STEEL C45
6202-6003
150 KG
STEEL - ORANGE
Type 68

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy products.

Type 68
1/2x5/16” Z=17
STEEL C45
6204
175 KG
STEEL - ORANGE
Type 29

Load roller with plastic bearing cartridges, fitted with a easy rol grooved ball bearing. Suitable for transporting medium- heavy products on a belt conveyor or a gravity conveyor in a dry, dusty environment.

Type 29
PPco
6202-6003 Easy rol
100 KG
ORANGE - GREY
Type 29-I

Load roller with curved plastic bearing cartridges, fitted with a easy rol grooved ball bearing. Suitable for transporting medium-heavy products on a belt conveyor or a gravity conveyor in a dry, dusty environment.

Type 29-I
PPco
6202-6003 Easy rol
100 KG
ORANGE - GREY
Type 69

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of heavy products with hard and flat undersides.

Type 69
5/8x3/8” Z=15
0,05 - 0,07
STEEL C45
6204-6005
200 KG
STEEL - ORANGE
Type 05

Free-running conveyor roller with plastic roller bearing, fitted with steel ball bearings. Suitable for transporting small, lightweight products on a gravity conveyor in a dry, dust-free environment.

Type 05
Ppco-POM
Steel Balls
3 - 7 KG
Grey
Type 06

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings. Suitable for transporting small, lightweight products on a gravity conveyor in a humid, dust-free environment

Type 06
Ppco-POM
SS-Balls
3 - 7 KG
Grey
Type 70

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of heavy products.

Type 70
5/8x3/8” Z=15
STEEL C45
6204-6005
200 KG
STEEL - ORANGE
Type 30

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30-I

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30-I
PPco
6202-6003
100 KG
ORANGE - GREY
Type 72

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of very heavy products.

Type 72
3/4x7//16” Z=13
STEEL C45
6204-6005
250 KG
STEEL - ORANGE
Type 10

Free-running conveyor roller with plastic roller bearing, fitted with steel ball bearings. Suitable for transporting lightweight products on a gravity conveyor in a dry, dust-free environment. If the roller bearing is fitted with a dust-cap, this roller is also suitable for use in dusty environments.

Type 10
Ppco-POM
Steel Balls
10 KG
grey - orange
Type 11

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings and dust cap. Suitable for transporting lightweight products on a gravity conveyor in a humid, dust-free environment. If the roller bearing is fitted with a dust-cap, this roller is also suitable for use in humid, dusty environments.

Type 11
Ppco-POM
SS-Balls
10 KG
grey - orange
Type 80, 81 & 82

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Type 80
0,05 - 0,07
± 10%
max 6 mm
Type 30NZ

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing equipped with a spring loaded plastic hexagonal 11 adapter both sides. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 30 NZ
PPco
6202-6003
50 KG
ORANGE - GREY
Type 31

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 31
Pa 6
6202
100 KG
ORANGE - GREY
Type 83

Accumulating load roller with adjustable accumulation pressure. Can be implemented with a single or double steel sprocket head, fitted with grooved ball bearings. Suitable for transporting medium-heavy to heavy products that do not vary in weight. The friction from the dry plate coupling can be adjusted by means of a self-locking nut.

Type 83.jpg
1/2x5/16” Z=15
STEEL C45
6204-6005
200 KG
STEEL - ORANGE
Type 12

Conveyor roller with plastic roller bearing, fitted with polyamide sleeve bearing. Suitable for transporting lightweight products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 12
PC
PA 6.6
20 KG
grey - orange
± 95 RPM
Type 13

Conveyor roller with plastic roller bearing, fitted with sealed polyamide sleeve bearing and plastic spindle hub. Suitable for transporting lightweight products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications within the food industry.

Type 13
PC
PA 6.6
10 KG
orange - black
± 95 RPM
Type 85

Accumulating load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of lightweight products with a hard and flat underside.

Type-85
HTD-8M pulley Z=20
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 32

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 32
PC-Pa 6
6204
180 KG
ORANGE - BLACK
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 86

Fixed powered load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting lightweight products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Type-86
HTD-8M pulley Z=20
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 14

Conveyor roller with plastic roller bearing, fitted with oiled bronze sleeve bearing. Suitable for transporting medium-heavy products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 14
PC
Oiled bronze
125 KG
orange
± 500 RPM
Type 17

Conveyor roller with plastic roller bearing, fitted with polyamide sleeve bearing. Suitable for transporting lightweight products on a belt conveyor or powered roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 17
PA 6.6
PA 6.6
20 KG
orange
± 95 RPM
Type 87

Accumulating load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of medium-heavy products with a hard and flat underside.

Type 87
HTD-8M pulley Z=20
0.05 - 0.07
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 34

Load roller with steel bearing cartridges fixated by curling, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 34
Steel zinkplated
6202-6204
120 - 200 KG
ZINKPLATED
Type 90-90a

Two-piece floating troughed idler comprising a single bent spindle and two load rollers, welded onto a foot that has been treated with primer. Suitable for a lightweight to medium-heavy trough-shaped belt conveyor in dry, dusty and very humid, dusty environments (dependent on the type of load roller selected).

Type 90A.jpg
Type 01

Free-running plastic wheel, fitted with stainless steel ball bearings. Suitable for transporting lightweight products on a gravity conveyor in a humid, dust-free environment.

Type 01
Ppco-POM + PA 6.6
SS-Balls
10 KG
BLUE
Type 91

Two-piece troughed idler, mounted on a cold-rolled U-profile 65 x 42 x 4 mm and fitted with side supports. Available as standard with a trough angle of 20°, treated where appropriate with primer.

Type 91en92.jpg
Type 02

Free-running plastic wheel with guide disc.

Type 02
Ppco-POM + PA 6.6
SS-Balls
10 KG
Blue
Type 37

Load roller with welded steel bearing cartridges, fitted with a plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor.

Type 37
Steel - PPco
6204
200 KG
STEEL - ORANGE
Type 88

Fixed powered load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting medium-heavy products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Type 88
HTD-8M pulley Z=20
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 20

Free-running conveyor roller with zinc plated steel roller bearing cartridges, fitted with a bright steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a dry, dust-free environment.

Type 20
Steel zinkplated
Steel con. bearing
30-80 KG
zink plated
Type 21

Free-running conveyor roller with zinc plated steel roller bearing, fitted with a bright steel conical bearing. Suitable for transporting heavy products on a gravity conveyor in a dry, dust-free environment. If the roller bearing is fitted with a dust cap, this roller is also suitable for use in dry, dusty environments.

Type 21
Steel zinkplated
Steel con. bearing
120 KG
zink plated
Type 89-1KA

Accumulating conveyor roller with a plastic Poly-VG head , fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides and is a low-noise conveyor- roller.

Type891KAen892KV.jpg
Poly-V 9 ribs
0,05 - 0,07
PA 6.6 HI
6202
40 KG
2-3-4 ribs
BLACK - ORANGE
Type 38

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Type 38
Steel - PPco
6204-6206
200 KG
STEEL - BLACK
Type 03

Free-running steel wheel, fitted with bright steel ball bearings. Suitable for transporting medium-heavy products on a gravity conveyor in a dry, humid, dust-free environment.

Type 03
Steel zinkplated
Steel Balls
20 KG
Steel
Type 92

Two-piece troughed idler, mounted on a cold-rolled U-profile 100 x 50 x 5 mm and fitted with side supports. Available as standard with a trough angle of 20°, treated where appropriate with primer.

Type 91en92.jpg
Type 93

Three-piece troughed idler, mounted on a cold-rolled U-profile 65 x 42 x 4 mm and fitted with side supports. Available as standard with a trough angle of 30°, treated where appropriate with primer.

Type 93en94.jpg
Type 101

Steel guide collar, pressed around the tube (or welded on if appropriate). For guiding or positioning the product to be transported. A selection of dimensions using sheet thickness 4 mm, made from full material or from stainless steel.

type101
Type 39

Load roller with welded steel bearing cartridges, fitted with a steel labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a dusty environment. This roller is also available with heat‐resistant grease and heat‐resistant ball bearing.

Type 39
Steel
6204-6005
200 KG
STEEL
Type 89-2KV

Fixed drive conveyor roller with a Poly-VG head , fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Type891KAen892KV.jpg
Poly-V 9 ribs
PA 6.6
6202
40 KG
2-3-4 ribs PJ
BLACK - ORANGE
Type 22

Conveyor roller with zinc plated steel roller bearing cartridge, fitted with a bright steel conical bearing. The roller bearing cartridge is standard fitted with a ring seal. Suitable for transporting heavy products op a roller conveyor or belt conveyor in a humid, dusty environment.

Type 22
Steel zinkplated
Steel con. bearing
150 KG
zink plated
Type 25

Free-running conveyor roller with plastic roller bearing, fitted with a zinc plated steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a dry, dusty environment.

Type 25
PPco
Steel con. bearing
75 KG
orange - grey
Type 89-3SA

Accumulating drive conveyor roller with a Steel Poly-VG head, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Type 893SA.jpg
Poly-V 9 ribs
0,05 - 0,07
C45
6202
100 KG
2-3-4 ribs PJ
STEEL - ORANGE
Type 40

Load roller with welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 40
Steel
6204-6305
300 KG
STEEL
Type 102

Spindle size adapter made of plastic or sintered steel to enlarge the end flats on spindles ø20 mm to 30 x 10 mm (upper belt, of 30 x 13 mm bottom belt).

type102
Type 94

Three-piece troughed idler, mounted on a cold-rolled U-profile 100 X 50 X 5 mm and fitted with side supports. Available as standard with a trough angle of 30°, treated where appropriate with primer.

Type 93en94.jpg
Type 74

Load roller with conical plastic elements. The construction of this roller means that various kinds of bearing cartridges and/or sprocket heads can be fitted in. Its suitability for various applications is dependent on the type of sleeve and bearing cartridge. The conical elements are manufactured from black polyamide. This version is used in dry environments at temperatures of -20°C to 100°C. In sizes from RL = 197 mm up to and including RL = 601 mm, the larger side is closed off with a plastic lid.

Type 74
30
PA.6
standard 4º
500 mm
50 KG
black
Type 75

Load roller with conical plastic elements. The construction of this roller means that various kinds of bearing cartridges and/ or sprocket heads can be fitted in. The suitability for various applications is dependent on the type of sleeve and bearing cartridge.

Type 75 is made out of polyamide and is used in dry environments at temperatures of -20°C to 100°C. In sizes from RL = 390 mm up to and including RL = 690 mm, the larger side is closed off with a plastic lid.

Type 75
50
75-PA 6.6 HI
standard 4º
800 mm
75
BLACK - GREY
Type 95

Two-piece floating aluminium troughed idler. Available as standard with a trough angle of 25°. Suitable for a lightweight to medium-heavy trough-shaped belt conveyor in dry or very humid dusty environments (dependent on the type of load roller selected).

Type95.jpg
Type 103

Buffer ring or impact ring to protect the transport belt of a heavy belt conveyor at the loading points against denting/ crushing and premature wear.

type103
Type 41

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Type 41
Steel
6204-6206
300 KG
STEEL
Type 26

Free-running conveyor roller with plastic roller bearing fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a humid, dusty environment.

Type 26
ppro
SS 1.4301 con. bearing
25 KG
Orange - White
Type 89-4SV

Fixed drive conveyor roller with a welded Steel Poly-VG head. Suitable for the transportation of medium-heavy products. This version is a low-noise conveyor-roller.

Type894SV.jpg
Poly-V 9 ribs
C45
6202
100 KG
2-3-4 ribs PJ
STEEL - ORANGE
Type 89-5Sv

Fixed drive conveyor roller with a welded Steel Poly-VG head. Suitable for the transportation of medium-heavy products. This version is a low-noise conveyor-roller.

Type 895SV.jpg
Poly-V 13 ribs
C45
6202
150 KG
6 ribs
STEEL - ORANGE
Type 27

Free-running conveyor roller with inside plastic sealed bearing, fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications in the food industry.

Type 27
PPco
SS 1.4301 con. bearing
25 KG
WHITE
Type 42

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 42
Steel
6202 - ... - 6306
300 KG
STEEL
Type 104

Supporting ring to reduce the extent to which the product gets caked onto the bottom belt rollers of belt conveyors.

type104
Type 96

Three-piece floating aluminium troughed idler. Available as standard with a trough angle of 25°. Suitable for lightweight to medium-heavy trough-shaped belt conveyor in dry or very humid dusty environments (dependent on the type of load roller selected).

Type 96.jpg
Type 77

Steel conical load roller with welded bearing cartridges and/or sprocket head, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy to heavy products on a belt conveyor or curves in a powered roller conveyor in a dry, dusty environment. For gravity curves, the roller can be fitted with free-running conical bearings.

Type 77
1.5 - 2.0 - 2.5 mm
STEEL SS
standard 4º
800 mm
50 - 200 KG
STEEL SS
Drive roller

Thanks to the combination of a strong brushless conveyor roller (the 50DRX and 60DRX), NDW has a new technology and power that is suitable for transporting light to semi-heavy products, up to 300 kg.

rol met kabeltje Nieuw Oranje
Close