Type 31

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 31
Pa 6
6202
100 KG
ORANGE - GREY
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 05

Free-running conveyor roller with plastic roller bearing, fitted with steel ball bearings. Suitable for transporting small, lightweight products on a gravity conveyor in a dry, dust-free environment.

Type 05
Ppco-POM
Steel Balls
3 - 7 KG
Grey
Type 06

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings. Suitable for transporting small, lightweight products on a gravity conveyor in a humid, dust-free environment

Type 06
Ppco-POM
SS-Balls
3 - 7 KG
Grey
Type 80, 81 & 82

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Type 80
0,05 - 0,07
± 10%
max 6 mm
Type 31

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 31
Pa 6
6202
100 KG
ORANGE - GREY
Type 12

Conveyor roller with plastic roller bearing, fitted with polyamide sleeve bearing. Suitable for transporting lightweight products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 12
PC
PA 6.6
20 KG
grey - orange
± 95 RPM
Type 13

Conveyor roller with plastic roller bearing, fitted with sealed polyamide sleeve bearing and plastic spindle hub. Suitable for transporting lightweight products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications within the food industry.

Type 13
PC
PA 6.6
10 KG
orange - black
± 95 RPM
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 14

Conveyor roller with plastic roller bearing, fitted with oiled bronze sleeve bearing. Suitable for transporting medium-heavy products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 14
PC
Oiled bronze
125 KG
orange
± 500 RPM
Type 17

Conveyor roller with plastic roller bearing, fitted with polyamide sleeve bearing. Suitable for transporting lightweight products on a belt conveyor or powered roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 17
PA 6.6
PA 6.6
20 KG
orange
± 95 RPM
Type 20

Free-running conveyor roller with zinc plated steel roller bearing cartridges, fitted with a bright steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a dry, dust-free environment.

Type 20
Steel zinkplated
Steel con. bearing
30-80 KG
zink plated
Close