Type 30

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30-I

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30-I
PPco
6202-6003
100 KG
ORANGE - GREY
Type 32

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 32
PC-Pa 6
6204
180 KG
ORANGE - BLACK
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 42

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 42
Steel
6202 - ... - 6306
300 KG
STEEL
Type 45

Accumulating conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type 45
1/2x5/16” Z=11
0,05 - 0,07
PA 6.6 HI
6202
40 KG
BLACK - ORANGE
Type 46

Fixed drive conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Suitable for the transportation of lightweight products. This version is only for use in continuous transport.

Type 46
1/2x5/16” Z=11
PA 6.6 HI
6202
40 KG
BLACK - ORANGE
Type 47

Accumulating conveyor roller with a single steel sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 47
1/2x5/16” Z=11
0,05 - 0,07
C45
6202
100 KG
ZINK PLATED - ORANGE
Type 48

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 48
1/2x5/16” Z=11
C45
6202
100 KG
STEEL
Type 49

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 49
1/2x5/16” Z=13
0,05 - 0,07
STEEL
6202
100 KG
ZINK PLATED - ORANGE
Type 50

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 50
1/2x5/16” Z=13
C45
6202
100 KG
STEEL - ORANGE
Type 51

Accumulating conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type 51en52.jpg
1/2x5/16” Z=14
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 52

Fixed drive conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Type 52
1/2x5/16” Z=14
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 53

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type 53
1/2x5/16” Z=14
0,05 - 0,07
STEEL
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 54

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 54
1/2x5/16” Z=14
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 59

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type596063en64.jpg
1/2x5/16” Z=13
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 60

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Type596063en64.jpg
1/2x5/16” Z=13
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 61

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type-61
1/2x5/16” Z=13
0,05 - 0,07
STEEL C45
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 62

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Type 62en66.jpg
1/2x5/16” Z=13
STEEL C45
6202-6003
150 KG
ZINK PLATED - ORANGE
Type 63

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Type596063en64.jpg
1/2x5/16” Z=14
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 64

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of medium‐heavy products. This version is exclusively for use in continuous transport.

Type596063en64
1/2x5/16” Z=14
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 65

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium-heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Type-65
1/2x5/16” Z=14
0,05 - 0,07
STEEL C45
6202-6003
100 KG
ZINK PLATED - ORANGE
Type 66

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy products.

Type 62en66.jpg
1/2x5/16” Z=14
STEEL C45
6202-6003
150 KG
STEEL - ORANGE
Type 30

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30-I

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30-I
PPco
6202-6003
100 KG
ORANGE - GREY
Type 11

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings and dust cap. Suitable for transporting lightweight products on a gravity conveyor in a humid, dust-free environment. If the roller bearing is fitted with a dust-cap, this roller is also suitable for use in humid, dusty environments.

Type 11
Ppco-POM
SS-Balls
10 KG
grey - orange
Type 80, 81 & 82

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Type 80
0,05 - 0,07
± 10%
max 6 mm
Type 83

Accumulating load roller with adjustable accumulation pressure. Can be implemented with a single or double steel sprocket head, fitted with grooved ball bearings. Suitable for transporting medium-heavy to heavy products that do not vary in weight. The friction from the dry plate coupling can be adjusted by means of a self-locking nut.

Type 83.jpg
1/2x5/16” Z=15
STEEL C45
6204-6005
200 KG
STEEL - ORANGE
Type 13

Conveyor roller with plastic roller bearing, fitted with sealed polyamide sleeve bearing and plastic spindle hub. Suitable for transporting lightweight products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications within the food industry.

Type 13
PC
PA 6.6
10 KG
orange - black
± 95 RPM
Type 85

Accumulating load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of lightweight products with a hard and flat underside.

Type-85
HTD-8M pulley Z=20
0,05 - 0,07
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 32

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 32
PC-Pa 6
6204
180 KG
ORANGE - BLACK
Type 33

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Type 33
Steel - SS
zz - 2RS
10 - 250 KG
STEEL - SS
Type 86

Fixed powered load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting lightweight products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Type-86
HTD-8M pulley Z=20
PA 6.6 HI
6202-6003
40 KG
BLACK - ORANGE
Type 14

Conveyor roller with plastic roller bearing, fitted with oiled bronze sleeve bearing. Suitable for transporting medium-heavy products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Type 14
PC
Oiled bronze
125 KG
orange
± 500 RPM
Type 87

Accumulating load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of medium-heavy products with a hard and flat underside.

Type 87
HTD-8M pulley Z=20
0.05 - 0.07
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 90-90a

Two-piece floating troughed idler comprising a single bent spindle and two load rollers, welded onto a foot that has been treated with primer. Suitable for a lightweight to medium-heavy trough-shaped belt conveyor in dry, dusty and very humid, dusty environments (dependent on the type of load roller selected).

Type 90A.jpg
Type 88

Fixed powered load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting medium-heavy products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Type 88
HTD-8M pulley Z=20
STEEL
6202-6003
100 KG
STEEL - ORANGE
Type 89-1KA

Accumulating conveyor roller with a plastic Poly-VG head , fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides and is a low-noise conveyor- roller.

Type891KAen892KV.jpg
Poly-V 9 ribs
0,05 - 0,07
PA 6.6 HI
6202
40 KG
2-3-4 ribs
BLACK - ORANGE
Type 89-2KV

Fixed drive conveyor roller with a Poly-VG head , fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Type891KAen892KV.jpg
Poly-V 9 ribs
PA 6.6
6202
40 KG
2-3-4 ribs PJ
BLACK - ORANGE
Type 89-3SA

Accumulating drive conveyor roller with a Steel Poly-VG head, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Type 893SA.jpg
Poly-V 9 ribs
0,05 - 0,07
C45
6202
100 KG
2-3-4 ribs PJ
STEEL - ORANGE
Type 95

Two-piece floating aluminium troughed idler. Available as standard with a trough angle of 25°. Suitable for a lightweight to medium-heavy trough-shaped belt conveyor in dry or very humid dusty environments (dependent on the type of load roller selected).

Type95.jpg
Type 26

Free-running conveyor roller with plastic roller bearing fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a humid, dusty environment.

Type 26
ppro
SS 1.4301 con. bearing
25 KG
Orange - White
Type 89-4SV

Fixed drive conveyor roller with a welded Steel Poly-VG head. Suitable for the transportation of medium-heavy products. This version is a low-noise conveyor-roller.

Type894SV.jpg
Poly-V 9 ribs
C45
6202
100 KG
2-3-4 ribs PJ
STEEL - ORANGE
Type 89-5Sv

Fixed drive conveyor roller with a welded Steel Poly-VG head. Suitable for the transportation of medium-heavy products. This version is a low-noise conveyor-roller.

Type 895SV.jpg
Poly-V 13 ribs
C45
6202
150 KG
6 ribs
STEEL - ORANGE
Type 27

Free-running conveyor roller with inside plastic sealed bearing, fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications in the food industry.

Type 27
PPco
SS 1.4301 con. bearing
25 KG
WHITE
Type 42

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Type 42
Steel
6202 - ... - 6306
300 KG
STEEL
Type 96

Three-piece floating aluminium troughed idler. Available as standard with a trough angle of 25°. Suitable for lightweight to medium-heavy trough-shaped belt conveyor in dry or very humid dusty environments (dependent on the type of load roller selected).

Type 96.jpg
Close