Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Load roller with welded steel bearing cartridges, fitted with a plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor.

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.

Accumulating conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Fixed drive conveyor roller with a single plastic sprocket, fitted with a grooved ball bearing. Suitable for the transportation of lightweight products. This version is only for use in continuous transport.

Accumulating conveyor roller with a single steel sprocket, fitted with a grooved ball bearing. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Accumulating conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Fixed drive conveyor roller with a single plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Accumulating conveyor roller with a single steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium‐heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of heavy products.

Fixed drive conveyor roller with a welded single steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of very heavy products.

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport.

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium‐heavy products.

Accumulating conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides.

Fixed drive conveyor roller with a double plastic sprocket, fitted with two grooved ball bearings. Suitable for the transportation of medium‐heavy products. This version is exclusively for use in continuous transport.

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of medium-heavy products with hard and flat undersides. Also available with a fixed plastic ring exclusively for use in continuous transport.

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy products.

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of medium-heavy products.

Accumulating conveyor roller with a double steel sprocket, fitted with two grooved ball bearings. Because it makes use of a friction coupling, this version is suitable for an accumulating roller conveyor for the transportation of heavy products with hard and flat undersides.

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of heavy products.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Fixed drive conveyor roller with a welded double steel sprocket, fitted with a grooved ball bearing. Suitable for the transportation of very heavy products.

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings and dust cap. Suitable for transporting lightweight products on a gravity conveyor in a humid, dust-free environment. If the roller bearing is fitted with a dust-cap, this roller is also suitable for use in humid, dusty environments.

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Accumulating load roller with adjustable accumulation pressure. Can be implemented with a single or double steel sprocket head, fitted with grooved ball bearings. Suitable for transporting medium-heavy to heavy products that do not vary in weight. The friction from the dry plate coupling can be adjusted by means of a self-locking nut.

Conveyor roller with plastic roller bearing, fitted with sealed polyamide sleeve bearing and plastic spindle hub. Suitable for transporting lightweight products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications within the food industry.

Accumulating load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of lightweight products with a hard and flat underside.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Load roller with internal turned bearing chambers, fitted with a grooved ball bearing. Suitable for transporting heavy to very heavy products on a belt conveyor or powered roller conveyor in a dry or humid dusty environment. The load capacity is dependent on tube diameter, wall thickness, tube length and bearings. This version is often used as a roller for connecting two conveyor segments or as a switch roller.

Fixed powered load roller with a plastic HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting lightweight products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Conveyor roller with plastic roller bearing, fitted with oiled bronze sleeve bearing. Suitable for transporting medium-heavy products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Accumulating load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Because it uses a friction coupling, this version is suitable for an accumulating roller conveyor for low-noise transportation of medium-heavy products with a hard and flat underside.

Two-piece troughed idler, mounted on a cold-rolled U-profile 65 x 42 x 4 mm and fitted with side supports. Available as standard with a trough angle of 20°, treated where appropriate with primer.

Load roller with welded steel bearing cartridges, fitted with a plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor.

Fixed powered load roller with a steel HTD-8M pulley for a tangential toothed belt, fitted with two grooved ball bearings. Suitable for transporting medium-heavy products at a high transportation speed and a low noise level. This version is exclusively for use in continuous transport.

Accumulating conveyor roller with a plastic Poly-VG head , fitted with two grooved ball bearings. Because it makes use of a friction coupling, this roller is suitable for an accumulating roller conveyor for the transportation of lightweight products with hard and flat undersides and is a low-noise conveyor- roller.

Load roller with welded steel bearing cartridges, fitted with a multiple plastic labyrinth and a grooved ball bearing. Suitable for transporting heavy products on a belt conveyor or powered roller conveyor in a very humid and dusty environment.

Two-piece troughed idler, mounted on a cold-rolled U-profile 100 x 50 x 5 mm and fitted with side supports. Available as standard with a trough angle of 20°, treated where appropriate with primer.

Three-piece troughed idler, mounted on a cold-rolled U-profile 65 x 42 x 4 mm and fitted with side supports. Available as standard with a trough angle of 30°, treated where appropriate with primer.

Fixed drive conveyor roller with a Poly-VG head , fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Accumulating drive conveyor roller with a Steel Poly-VG head, fitted with two grooved ball bearings. Suitable for the transportation of lightweight products. This version is exclusively for use in continuous transport and is a low-noise conveyor-roller.

Three-piece troughed idler, mounted on a cold-rolled U-profile 100 X 50 X 5 mm and fitted with side supports. Available as standard with a trough angle of 30°, treated where appropriate with primer.

Free-running conveyor roller with plastic roller bearing fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a humid, dusty environment.

Fixed drive conveyor roller with a welded Steel Poly-VG head. Suitable for the transportation of medium-heavy products. This version is a low-noise conveyor-roller.

Free-running conveyor roller with inside plastic sealed bearing, fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications in the food industry.

Load roller with massif welded steel bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting very heavy products on a belt conveyor or powered roller conveyor in a dusty environment.