Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Free-running conveyor roller with plastic roller bearing, fitted with stainless steel ball bearings and dust cap. Suitable for transporting lightweight products on a gravity conveyor in a humid, dust-free environment. If the roller bearing is fitted with a dust-cap, this roller is also suitable for use in humid, dusty environments.

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Conveyor roller with plastic roller bearing, fitted with polyamide sleeve bearing. Suitable for transporting lightweight products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Conveyor roller with plastic roller bearing, fitted with sealed polyamide sleeve bearing and plastic spindle hub. Suitable for transporting lightweight products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications within the food industry.

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Conveyor roller with plastic roller bearing, fitted with oiled bronze sleeve bearing. Suitable for transporting medium-heavy products on a belt conveyor or driven roller conveyor in a very humid, aggressive environment. Especially for applications within the food industry.

Two-piece troughed idler, mounted on a cold-rolled U-profile 65 x 42 x 4 mm and fitted with side supports. Available as standard with a trough angle of 20°, treated where appropriate with primer.

Free-running conveyor roller with plastic roller bearing fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in a humid, dusty environment.

Free-running conveyor roller with inside plastic sealed bearing, fitted with a stainless steel conical bearing. Suitable for transporting medium-heavy products on a gravity conveyor in locations where no water, bacteria, etc. may penetrate the roller. Especially for applications in the food industry.