Driven rollers

Type 30

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30
PPco
6202-6003
100 KG
ORANGE - GREY
Type 30-I

Load roller with curved plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment. If the bearing cartridge is fitted with a V‐ring, this roller is also suitable for use in very humid environments.

Type 30-I
PPco
6202-6003
100 KG
ORANGE - GREY
Type 31

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 31
Pa 6
6202
100 KG
ORANGE - GREY
Type 32

Load roller with plastic bearing cartridges, fitted with a grooved ball bearing. Suitable for transporting medium‐heavy to heavy products on a belt conveyor or powered roller conveyor in a dry, dusty environment.

Type 32
PC-Pa 6
6204
180 KG
ORANGE - BLACK
Type 80, 81 & 82

Types 80 & 81 or types 80 & 82 together make up a round belt powered accumulating roller conveyor for the transportation of lightweight to medium-heavy products. This works as follows: a drive axle ø 25 or ø 35 mm is installed transversely beneath the rollers. Polyamide (PA 6) diabolo (deeply grooved) wheels with a sliding fitting have been threaded onto the axle. A round belt of no more than ø 6 mm is placed around the diabolo wheel and the groove in the roller. The pre-tensioned round belt provides friction between axle and diabolo wheel. This friction causes the roller to be driven. If the product on the roller is obstructed, then the diabolo wheel can slip on the axle. The advantage of this method of delivering power to the rollers is that it operates near enough silently, even at high speeds. You should take into account that the roller can acquire a static electric charge if non-conducting bearing cartridges are used, which can cause sparks to jump between the roller and the frame.

Type 80
0,05 - 0,07
± 10%
max 6 mm
Close